Since Emerson's latest TREX Communicator came into the market, many friends will not use TREX to debug the transmitter.
Today we will talk about how to set the Fuji FKP pressure transmitter with the TREX Communicator.
1. How to set the device tag of Fuji FKP pressure transmitter with Emerson TREX Communicator. Specific steps are as follows:
1. Turn on the device, connect the TREX Communicator to the Fuji FKP pressure transmitter, and select HART.
2. After the communication is successful, select Online, then the TREX function menu that can be set by the Fuji FKP pressure transmitter will be displayed.
3. Click to select Setup Wizard.
4. Click to select Basic Settings.
5. Equipment tag number.
2. How to set the measurement unit and damping of Fuji FKP pressure transmitter with Emerson TREX Communicator. Specific steps are as follows:
1. Turn on the device, connect the TREX Communicator to the Fuji FKP pressure transmitter, and select HART.
2. After the communication is successful, select Online, then the TREX function menu that can be set by the Fuji FKP pressure transmitter will be displayed.
3. Click to select Setup Wizard.
4. Click to select Basic Settings.
5. Click to select the measurement/damping unit.
6. Click to set the measurement unit and damping.
3. How to set the analog output of Fuji FKP pressure transmitter with Emerson TREX Communicator. Specific steps are as follows:
1. Turn on the device, connect the TREX Communicator to the Fuji FKP pressure transmitter, and select HART.
2. After the communication is successful, select Online, then the TREX function menu that can be set by the Fuji FKP pressure transmitter will be displayed.
3. Click to select Setup Wizard.
4. Click to select Basic Settings.
5. Click to select analog output.
6. Click to select the main variable as.
7. Click to set the upper limit of the actual range of the main variable/the lower limit of the main variable range.
4. How to set the alarm/saturation level of Fuji FKP pressure transmitter with Emerson TREX Communicator. Specific steps are as follows:
1. Turn on the device, connect the TREX Communicator to the Fuji FKP pressure transmitter, and select HART.
2. After the communication is successful, select Online, then the TREX function menu that can be set by the Fuji FKP pressure transmitter will be displayed.
3. Click to select Setup Wizard.
4. Click to select Basic Settings.
5. Click to select the alarm/saturation level.
6. Click to select 1 analog output alarm type.
7. Click to set high, low, and keep the latest output value.
8. Click to set 2 high alarm/3 high saturation/4 low security and/5 low alarm.
9. Click Select 6 to configure the alarm and saturation levels.
10. Click to set namur/rosemount/other/exit.
